Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Liner & Rebuild Across Medford
Chimney liner and rebuild work in Medford typically runs $2,800-$6,500 for full relining and $4,200-$12,000 for partial or full rebuilds, with most inspections completed same-week and relining jobs finished in a single day. Our crews are in Medford regularly, from Hillside to West Medford to the Mystic River waterfront, and we coordinate dispatch from our Boston office so we can reach any Medford address without the scheduling delays that come from out-of-town operators.
Medford’s triple-decker housing stock presents chimney problems you won’t find in suburban markets. A single masonry stack often contains two or three flues under different ownership, with abandoned oil-to-gas flues left open to the weather. We’re familiar with these buildings. We know how to trace which flue serves which unit, document what we find with camera photos you can see, and deliver a plain-English verdict on what needs doing now, what can wait, and what it will cost before we start. Call (857) 392-4709 to book a Level-2 camera inspection.
Why Hearthstone Chimney Co. Is Medford’s Preferred Chimney Liner & Rebuild Company
We’ve served communities across Greater Boston for over 42 years, and Medford has been part of our regular route since the beginning. Our technicians know the difference between a Hillside triple-decker built in 1895 and a West Medford Colonial Revival from 1920, and they understand how each was originally vented, what got changed during the oil-to-gas conversion decades, and where the problems hide.
Our reputation here is built on documentation. Every Level-2 inspection ends with photos you can see and a written verdict you can understand. No jargon, no scare tactics, no push to book work you don’t need. The 90-Day Done Right Promise backs every job in writing - if it’s not right, we make it right, no paperwork and no arguing. That’s the Keystone Standard we’ve operated by since 1984.
A live person answers our phones 24 hours a day, 7 days a week. Not a voicemail, not a callback queue. When you call (857) 392-4709, you speak to someone who can schedule your Medford inspection or answer your questions directly.
Our Chimney Liner & Rebuild Services in Medford
Stainless Steel Liner Installation
Stainless steel liners are our standard for relining oversized old coal and oil flues in Medford’s century homes. The original flue passages in these buildings were designed for draft-hungry solid fuel and later adapted for oil burners, leaving a volume far too large for modern gas appliances. That mismatch produces acidic condensate that eats terra-cotta from the inside out. We size and install DuraFlex stainless liners to match the appliance exactly, restoring proper draft and protecting the masonry. Most stainless liner jobs in Medford run $2,800-$4,500 and finish in one day.

Flexible Liner Solutions
Some Medford chimneys have offsets, bends, or tight cleanouts that make rigid liner installation impractical. Flexible liners from trusted brands navigate these obstacles without compromising draft performance. We use professional-grade flexible products from our approved manufacturer list, never builder-grade substitutes. Flexible liner installation in Medford typically costs $3,200-$5,000 depending on length and access.

Liner Replacement
When a terra-cotta liner has cracked, shifted, or deteriorated beyond repair, partial or full replacement is the only safe option. In Medford, we see this most often in triple-deckers where one flue failed and the damage went unnoticed because tenants assumed another landlord was handling maintenance. Our Chimney Liner & Rebuild team removes the damaged liner, inspects the surrounding masonry with a camera, and installs a new system sized to the appliance. Liner replacement in Medford ranges from $3,500-$6,500.

Partial Chimney Rebuild
Medford’s freeze-thaw cycle, intensified by Mystic River valley moisture, destroys chimney crowns and upper brick courses faster than inland communities. When spalling has compromised the structural integrity above the roofline but the lower stack is sound, we rebuild from the shoulder up. This includes a properly formed crown with adequate overhang, new matching brick where needed, and flashing integration that sheds water instead of trapping it. Partial rebuilds in Medford typically run $4,200-$8,500.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Medford
We stock professional-grade materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, so Medford jobs don’t wait on parts shipments. DuraFlex stainless liners handle our local condensate conditions. HeatShield’s cerfractory resurfacing products restore cracked terra-cotta when full replacement isn’t necessary. Famco and Copperfield caps and flashing components stand up to the wind exposure and freeze-thaw cycling that defines Medford winters. Our technicians carry common sizes on the truck, which means most Medford liner and rebuild jobs start and finish in a single visit.
Common Chimney Liner & Rebuild Problems We See in Medford Homes
- Storm-driven rain penetrates cracked crowns. Medford’s wind patterns push rain directly into chimney tops, and a cracked or thinly-poured crown lets water track down the brick. The first sign is often a brownish ceiling stain on the top floor that gets blamed on the roof when the chimney is the real culprit.
- Wind-displaced caps leave flues open to moisture and animals. Gusts off the Mystic River valley lift or fully remove caps that were poorly secured or corroded. An open flue draws wet air straight into century-old lime-mortar joints, accelerating spalling and joint erosion that would otherwise take years to develop.
- Failed flashing rots dampers and erodes fireboxes from outside in. Step or counter-flashing that has pulled away from the roofline admits freeze-thaw water that rusts the damper assembly and saturates the firebox brick. By the time a homeowner notices the smell or sees rust staining, the damage is rarely superficial.
- Abandoned oil-to-gas flues draw moisture into shared masonry. In Medford’s triple-deckers, decommissioned flues were often left uncapped when a unit converted to gas. That open flue becomes a conduit for Mystic River valley moisture, cold air, and occasionally animals, compromising the active flues that share the same stack.
Pricing for Chimney Liner & Rebuild in Medford, MA
Here is what chimney liner and rebuild work costs in the Medford market:
| Service | Typical Range in Medford |
|---|---|
| Stainless steel liner installation | $2,800 - $4,500 |
| Flexible liner installation | $3,200 - $5,000 |
| Liner replacement (full) | $3,500 - $6,500 |
| Partial rebuild (shoulder up) | $4,200 - $8,500 |
| Full chimney rebuild | $8,500 - $12,000+ |
| Level-2 camera inspection with photo report | $289 - $349 |
Three factors move these numbers: the height and accessibility of the stack, the extent of masonry damage hidden until camera inspection, and whether we must coordinate access with multiple tenants in a triple-decker. We provide no-hassle upfront pricing - the number on the estimate is the number on the invoice. Nothing is recommended without camera evidence you can see for yourself. Call (857) 392-4709 for a free estimate.
We Also Serve Cities Near Medford
Our crews work throughout Greater Boston, and we regularly schedule Chimney Liner & Rebuild in Medford alongside jobs in Malden, Somerville, Everett, and Cambridge. The same live-answer phone, same documented inspection process, same 90-Day Done Right Promise applies in every community we serve.
Serving Medford, MA - Our Local Coverage Area
We’re based in the Medford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Liner & Rebuild in Medford
It needs a proper cap at minimum, and often a liner assessment of the active flues it shares a stack with. An uncapped, abandoned flue draws cold, wet air directly into the shared masonry and into neighboring active flues, which is why we audit every flue in a Medford triple-decker before recommending any work. Call (857) 392-4709 to schedule a multi-flue inspection - estimates are free.
It is most often the crown, though failed flashing produces a similar stain pattern. In Medford, we find cracked or thinly-poured crowns letting storm-driven rain track down the brick interior, emerging as ceiling stains that look like roof leaks. A Level-2 camera inspection distinguishes crown failure from flashing failure in about twenty minutes, and we show you the photos so you can see the source yourself. Call (857) 392-4709 for an exact diagnosis - estimates are free.
You probably don’t, and neither does your neighbor. We trace flue ownership by dropping a camera and following the passage to the appliance or fireplace serving each unit, then we document which flue vents which appliance with photos and a written diagram. This audit is standard procedure on every Medford triple-decker we inspect because misidentified flues lead to incomplete repairs and ongoing safety hazards. Call (857) 392-4709 to book a flue-mapping inspection - estimates are free.
Every year, regardless of fuel type. Gas and oil appliances produce corrosive condensate that damages liners and masonry even when no visible fire is present, and Medford’s century-old lime mortar is already vulnerable to the Mystic River valley’s accelerated freeze-thaw cycling. Annual Level-2 inspection catches liner deterioration, crown cracks, and moisture intrusion before they become major rebuilds. Call (857) 392-4709 to schedule - estimates are free.
We use DuraFlex stainless steel liners sized precisely to the appliance’s venting requirements, not the original oversize flue passage. Stainless steel resists the acidic condensate produced by modern gas appliances and handles Medford’s temperature swings without the cracking that destroys terra-cotta. For flues with minor cracking that don’t require full replacement, HeatShield cerfractory resurfacing restores a smooth, sealed surface. Call (857) 392-4709 to discuss which solution fits your chimney - estimates are free.
Written by Russell Haines, Owner at Hearthstone Chimney Co., serving Medford and Greater Boston since 1984.





Before
After
Before
After
Before
After