Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Everett
Chimney repair in Everett typically runs from $450 for targeted mortar repointing up to $3,800 for partial rebuilding of a triple-decker’s shared stack, with most jobs scheduled within a week and completed in a single visit. Our crews know Everett’s streets well, from Broadway to Ferry Street to the dense blocks off Revere Beach Parkway, and we carry the materials to finish the job without a second trip. Call (857) 392-4709 - a live person answers, 24 hours a day.
We’ve been working on Everett chimneys for decades. The city’s triple-deckers and two-families, built fast between 1895 and 1925, share a problem you won’t find in suburban single-families: one brick stack serving multiple units, often with flues that were sized for coal, later patched for oil, then jury-rigged for gas. When we repair a chimney here, we’re not just fixing what you can see from the street. We’re tracing every flue to its source, because in Everett, the visible crack is rarely the whole story.
Why Hearthstone Chimney Co. Is Everett’s Preferred Chimney Repair Company
We’ve earned our reputation in Everett the slow way - by showing up, documenting what we find, and standing behind the work. Our Chimney Repair in Everett crews are background-checked, uniformed, and trained to work on the tight roofs and shared stacks that define this city’s housing stock. Most repairs are completed in one visit, with upfront pricing agreed before we start.
Everett homeowners call us back because we explain what we’re doing in plain English, not jargon. Every Level-2 inspection ends with photos you can see and a written verdict. If we recommend a repair, we show you why. If something can wait, we say so. Our 90-Day Done Right Promise covers every job in writing - if it’s not right, we make it right, no paperwork and no arguing.
Calls are answered by a live person, every hour of every day. Not a voicemail, not a callback queue. When you’re looking at a cracked chimney crown above your third-floor unit, you want to talk to someone who can schedule the work, not leave a message and hope.
Our Chimney Repair Services in Everett
Mortar Repointing
Repointing in Everett means more than raking out loose joints and packing in new mortar. The salt-laden air off Boston Harbor, carried up the Mystic River valley, eats away at lime mortar faster than freeze-thaw alone. We’ve repointed chimneys off Broadway where the exterior looked merely weathered, only to find the inner wythes - the hidden layers of brick - had turned to sand behind the face. Our repointing matches the original mortar’s compressive strength and permeability, using professional-grade mixes from Copperfield and Famco. We grind to proper depth, damp-cure correctly, and never skin-coat over failing joints. Done right, repointing on an Everett triple-decker should last 25-30 years. Done wrong, you’ll be calling someone again in five.
Spalling Brick Repair
Spalling - the flaking and crumbling of brick faces - is epidemic on Everett’s older chimneys. The combination of porous century-old brick, saturated mortar, and salt air causes the outer surface to pop off in layers. We see this worst on south- and west-facing exposures, where sun heats the brick after a damp night, trapping moisture that freezes and expands. Repair means removing damaged brick, matching replacement units for color and absorption, and addressing the water source. Sometimes that’s a failed crown. Sometimes it’s an abandoned flue pulling condensation through the stack. We fix the cause, not just the symptom.
Chimney Waterproofing
Waterproofing a chimney in Everett requires a breathable silane/siloxane sealer that lets vapor escape while blocking liquid water. Cheap film-forming sealers trap moisture inside and accelerate spalling. We apply professional-grade waterproofing from HeatShield and Olympia Chimney, products formulated for saturated New England masonry. On a typical Everett triple-decker, we also inspect and repair flashing, crown, and cap as part of the waterproofing scope - sealing the brick alone while ignoring a failed chimney crown is like fixing a roof leak by replacing the ceiling tile.
Flashing Repair
Flashing on Everett’s low-slope triple-decker roofs takes a beating. Step flashing rusts, counterflashing separates, and the constant thermal cycling of asphalt roofs pulls gaps at the chimney-to-roof intersection. We fabricate custom flashing from copper and coated steel, sealed with high-temperature sealants, and we always inspect the underlying roof deck for rot. In a city where roof access is tight and scaffolding is often necessary, we bring the materials and expertise to do the job without damaging shingles or requiring a roofer callback.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Everett
We stock professional-grade materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield - no builder-grade substitutes. For Everett’s dense housing, this matters. When we’re working on a shared chimney off Revere Beach Parkway or Ferry Street, we don’t have the luxury of ordering parts and coming back next week. Our trucks carry DuraFlex liners in common diameters, HeatShield cerfractory resurfacing mix, and Famco caps and dampers sized for multi-flue stacks. Most repairs are completed in a single visit because we arrive prepared for what Everett chimneys actually need.
Common Chimney Repair Problems We See in Everett Homes
- Orphaned flues from unit conversions. On a two-family off Broadway near the Mystic River, we went up to repoint a chimney crown that had spalled down to crumbly brick, and found the basement unit’s old oil flue sitting wide open and unlined next to the active gas flue. We capped the orphaned flue, installed a HeatShield liner in the shared stack, repointed the crown and adjacent mortar joints, and left both units with a sealed, correctly sized flue that no longer pulls river air into the house.
- Salt-accelerated mortar erosion. Everett’s Mystic River exposure means salt-laden air reaches masonry that inland communities at the same latitude protect. Combined with standard freeze-thaw, chimneys here typically show crown and joint deterioration at shorter intervals than comparable structures in MetroWest.
- Repointing that misses the real problem. A contractor repoints visible exterior brick while the shared stack still has a decommissioned, unlined flue pulling moisture and cold air into the building core. The new mortar looks sharp. The chimney keeps failing from inside.
- Mismatched flue-to-appliance sizing after conversions. A new high-efficiency furnace needs a smaller flue, but the old coal-era flue remains oversized. Draft stays weak, first-degree creosote builds on the smoke chamber, and the appliance runs inefficiently. Proper repair means resizing or relining, not just capping and hoping.
Pricing for Chimney Repair in Everett, MA
Here’s what chimney repair costs in Everett’s market, based on the work we actually perform:
| Service | Typical Range in Everett |
|---|---|
| Targeted mortar repointing (局部) | $450 - $1,200 |
| Spalling brick repair (partial face) | $680 - $1,850 |
| Chimney waterproofing treatment | $380 - $750 |
| Flashing repair or replacement | $520 - $1,400 |
| HeatShield liner resurfacing | $1,200 - $2,600 |
| DuraFlex stainless liner installation | $1,800 - $3,400 |
| Partial chimney rebuild (triple-decker stack) | $2,400 - $3,800 |
What moves the number: height and roof access (scaffolding adds cost), extent of hidden damage revealed during inspection, and whether the chimney serves multiple units requiring coordinated access. We provide upfront pricing before any work begins - the estimate number is the invoice number. No surprises on the bill. Senior and veteran discounts of 5% apply, and we offer $50 off any repair over $250. Call (857) 392-4709 for a free, exact quote.
We Also Serve Cities Near Everett
Our Chimney Repair teams work throughout the inner-ring Boston metro, including Malden, Chelsea, Revere, and Medford. Scheduling and dispatch are coordinated from our Boston office, with local crews serving each community. The same live-answer phone, same documented inspection, same 90-Day Done Right Promise applies whether you’re in Everett or a neighboring city.
Serving Everett, MA - Our Local Coverage Area
We’re based in the Everett area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Repair in Everett
Yes, and urgently. An abandoned flue that was never properly capped and decommissioned draws cold, moist air into the building core, accelerates deterioration of the shared stack, and can backdraft combustion gases from neighboring units. We cap orphaned flues with proper termination, inspect the remaining active flue for sizing and liner condition, and document the repair with photos. Call (857) 392-4709 for an inspection - estimates are free.
Everett sits along the Mystic River with direct exposure to salt-laden air from Boston Harbor, accelerating mortar joint erosion and brick spalling beyond what freeze-thaw alone causes inland. Triple-decker chimneys here also endure more thermal stress from serving multiple heating appliances. The combination means repointing intervals are typically shorter than in MetroWest or the Route 128 belt. We use salt-resistant professional-grade mortars and always address water intrusion sources, not just the visible cracks.
Yes, and this is common in Everett’s converted two-families and triple-deckers. We inspect each flue independently, size liners to each appliance’s specification, and ensure proper separation between gas and oil or solid-fuel flues. The critical step most crews skip: verifying that abandoned flues are fully sealed and capped, not just left open. We coordinate access with all unit owners and provide documentation each party can use for their own records and insurance.
Our Level-2 camera inspection examines every flue from firebox to crown for cracks, gaps, creosote buildup, and proper sizing; checks mortar joints inside and out for erosion, voids, and salt damage; evaluates the crown, cap, and flashing for water intrusion; and identifies orphaned or abandoned flues. You receive photos of every finding and a plain-English verdict with prioritized recommendations. Nothing is suggested without visual evidence you can see for yourself.
Start with a full Level-2 inspection to determine which flues are active, which are abandoned, and whether any unit conversions left dangerous conditions. In Everett’s condo boom near Encore Boston Harbor and Assembly Square, we’ve found chimneys that haven’t been inspected in decades, with unlined flues, separated wythes, and active gas appliances venting into oversized coal-era openings. Prioritize sealing abandoned flues, relining active ones to correct size, and repointing salt-damaged mortar. The rest can be scheduled based on what the inspection reveals. Call (857) 392-4709 to book - we’ll tell you exactly what you’re dealing with before any repair is discussed.
Written by Russell Haines, Owner at Hearthstone Chimney Co., serving Everett and local communities for over 42 years.