Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Fireplace Services Across Revere
Fireplace services in Revere typically range from $180 for a basic gas fireplace tune-up to $1,800 for firebox rebuilding or insert installation, with most damper repairs and conversions falling between $350 and $950. We dispatch to Revere from our Boston office, and our crews know the tight street parking, triple-decker roof access, and shared-stack configurations that define this city’s housing stock. If your fireplace is smoking, your damper won’t seal, or you’re converting from wood to gas in a multi-unit building, call us at (857) 392-4709 - a live person answers, 24 hours a day.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Hearthstone Chimney Co. Is Revere’s Preferred Fireplace Services Company
We’ve worked on Revere chimneys long enough to know that a “simple” fireplace repair on Beachmont or Broadway can turn complicated the moment you realize the flue you’re servicing shares a crown wash with the unit next door. Our Fireplace Services team has documented hundreds of Level-2 camera inspections in Revere alone, and homeowners here get photos they can see plus a plain-English verdict - no jargon, no pressure.
Our technicians are background-checked, uniformed, and complete most jobs in a single visit. We show up with no-hassle upfront pricing: the number on the estimate is the number on the invoice. Every job carries our 90-Day Done Right Promise in writing - if it’s not right, we come back, no arguing, no paperwork chase. We’ve been answering the phone with a live person for over 42 years, and we plan to be here in thirty more. That changes how you treat a customer.
Our Fireplace Services in Revere
Gas Fireplace Service
Gas fireplaces in Revere’s triple-deckers often run on lines retrofitted during oil-to-gas conversions, with valves tucked into basements that were never designed for modern appliances. We inspect burner assemblies, check for proper venting through shared stacks, and verify that your gas insert isn’t drafting into a neighbor’s abandoned flue. A typical gas fireplace service in Revere runs $180-$320.
Wood Burning Fireplace
Wood-burning fireplaces in Revere face a double burden: creosote buildup from actual use, and salt-air spalling of the surrounding brick that lets combustion gases leak into wall cavities. On the triple-deckers off Revere Beach Boulevard, we regularly find third-degree creosote glazing in flues that haven’t been swept in years, often sharing a stack with a gas unit that was converted decades ago. Annual sweeping here isn’t cautious - it’s necessary. Wood fireplace sweeping and inspection in Revere typically costs $250-$380.
Fireplace Insert
Insert installation is one of our most called-for services in Revere, and for good reason. A properly sized stainless liner - we use DuraFlex and Copperfield - can isolate your insert from a shared stack, eliminate draft reversal, and bring a century-old flue up to modern safety standards without rebuilding the entire chimney. Inserts also solve the creosote problem for homeowners who want the look of wood without the maintenance burden. Fireplace insert installation with liner in Revere generally runs $1,200-$1,800, depending on stack height and access.
Damper Repair
Damper failure is epidemic in Revere’s older housing. Cast-iron throat dampers rust solid from decades of salt-air exposure, and top-sealing dampers installed as replacements often fail because the flue crown they’re mounted to is already eroded. We inspect the full assembly, repair or replace the damper mechanism, and rebuild the crown if needed so the fix lasts. Damper repair or replacement in Revere typically costs $350-$650.
Firebox Repair
Spalled firebrick and deteriorated refractory mortar are common in Revere chimneys that have taken decades of salt spray through uncapped or poorly capped flues. We use HeatShield refractory materials for firebox resurfacing when the structure is sound, and we rebuild with new firebrick when it’s not. Firebox repair in Revere runs $650-$1,200 for resurfacing, $1,400-$2,200 for full rebuilds.
Fireplace Conversion
Converting a wood-burning fireplace to gas in a Revere triple-decker requires more than running a line and installing a log set. We need to verify that the flue will handle gas combustion byproducts without drafting into adjacent units, sleeve or line the flue if it shares a stack, and cap abandoned openings properly. Gas fireplace conversion with proper venting in Revere typically costs $950-$1,600.
Trusted Brands We Service in Revere
We stock parts and materials from DuraFlex, HeatShield, and Copperfield - professional-grade brands, no builder-grade substitutes. For Revere homeowners, that means faster turnaround because we’re not ordering parts after we diagnose the problem. Our trucks carry stainless liners, refractory mixes, damper assemblies, and cap hardware so most jobs finish in one visit. We also work with Gelco and Olympia Chimney products when a specific application calls for them.
Common Fireplace Services Problems We See in Revere Homes
- Shared-stack draft reversal. Because so many Revere triple-deckers were built with a single coal-era brick stack feeding two or three units, flues that look separate at the roofline often rejoin or share a crown wash below - so a fireplace service job on one floor can change draft for a neighbor’s appliance in the same stack. We map the full flue system before we touch anything.
- Uncapped abandoned flues after oil-to-gas conversion. When a unit converts and the old flue is left open, nor’easter rain and salt spray pour straight down, eroding mortar joints and spalling brick faces at twice the rate of capped stacks. We cap and seal these as standard practice, not an upsell.
- Third-degree creosote in “occasionally used” fireplaces. Revere homeowners often assume a firebox used only on weekends stays clean. In reality, slow burns in cold flues produce glazed creosote that won’t brush out with standard tools - and if that flue shares a stack with a gas appliance, the draft dynamics can push smoke and CO into living spaces.
- Salt-air spalling mistaken for “normal aging.” Brick faces that flake and pop in Revere are often blamed on age when the real culprit is oceanfront salt spray accelerated by freeze-thaw cycles. We distinguish structural spalling from surface weathering so you don’t pay for a rebuild when resurfacing will do.
Pricing for Fireplace Services in Revere, MA
Here’s what fireplace services cost in Revere’s market:
| Gas fireplace tune-up and safety check | $180-$320 |
| Wood fireplace sweeping and Level-2 inspection | $250-$380 |
| Damper repair or replacement | $350-$650 |
| Firebox refractory resurfacing | $650-$1,200 |
| Fireplace insert with stainless liner | $1,200-$1,800 |
| Gas fireplace conversion (proper venting) | $950-$1,600 |
| Firebox rebuild with new firebrick | $1,400-$2,200 |
Stack height, roof access difficulty, and whether we need to coordinate with neighbors in a shared building all affect the final number. We give you the full price before we start - no surprises on the bill. Estimates are free. Call (857) 392-4709 for an exact quote.
We Also Serve Cities Near Revere
Our crews work throughout the immediate area - Revere is our home base for coastal chimney work, and we regularly serve Chelsea, Everett, Malden, and Saugus. Dispatch and scheduling are coordinated from our Boston office, with local crews who know the triple-decker housing stock and salt-air conditions that define this stretch of the North Shore.
Serving Revere, MA - Our Local Coverage Area
We’re based in the Revere area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fireplace Services in Revere
They can, but only if each flue is properly sleeved or lined so combustion byproducts don’t cross between units. On a three-family off Revere Beach Boulevard, our tech found the top-floor gas fireplace sharing a stack with a second-floor wood-burning insert; the abandoned oil flue was uncapped, letting salt-laden rain in and spalling the brick. We installed a Copperfield stainless flue liner, sealed and capped the old flue, and rebuilt the smoke chamber so the second-floor draft pulled clean again. If your stack has multiple flues, we need to inspect the full system before signing off on safety. Call (857) 392-4709 for a free inspection.
Wind pressure from the open Atlantic overwhelms the natural draft in chimneys that aren’t properly capped or that share a stack with competing flues. Revere takes these storms head-on with no land buffer, and a down-draft can push smoke straight back down a marginal flue. The fix is usually a combination of a proper chimney cap, smoke chamber modification, and sometimes liner installation to strengthen draft independent of wind direction. Call (857) 392-4709 and we’ll diagnose it.
Annually, without exception. The salt-laden moisture driven into Revere’s chimney masonry by nor’easters accelerates mortar erosion and brick spalling through repeated freeze-thaw cycles every winter. A fireplace that might go two years between inspections in an inland climate needs yearly eyes on it here. Our $89 Seasonal Tune-Up includes a Level-1 inspection and written condition report.
Cap it and seal it properly, immediately. An open flue is a direct channel for rain, salt spray, and pests into the shared stack, and it destroys the chimney from the inside out. We see this constantly on the side streets running off Revere Beach Boulevard. Capping costs far less than the rebuild you’ll need if spalling progresses. We can coordinate with neighbors when the stack is shared. Call (857) 392-4709 to schedule.
Often yes, if the spalling is localized and the structural shell is sound. We use HeatShield refractory resurfacing to restore cracked and spalled firebox walls without dismantling the chimney, provided the rear wall thickness and surrounding masonry are intact. If the damage extends to the smoke chamber or flue liner, we may need to open the stack further. We’ll show you photos and give you a plain-English verdict - no work recommended without camera evidence you can see yourself. Call (857) 392-4709 for a free estimate.
Written by Russell Haines, Owner at Hearthstone Chimney Co., serving Revere and coastal Massachusetts communities for over 42 years.