Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Liner & Rebuild Across Revere
Chimney liner and rebuild work in Revere typically runs from $1,800 for a stainless steel liner replacement in a single-family flue to $8,500 or more for a partial or full rebuild of a salt-damaged triple-decker stack. Most liner installations and partial rebuilds are completed in one visit, with your crew dispatched from our Boston office and on the road to Revere within the hour.
We’ve been answering calls with a live person, 24 hours a day, 7 days a week, for over 42 years. If your chimney is showing signs of trouble - water in the firebox, crumbling brick on the roofline, or a draft that won’t hold - call (857) 392-4709 for a free estimate. Our Chimney Liner & Rebuild team knows Revere’s coastal chimneys inside and out.
Why Hearthstone Chimney Co. Is Revere’s Preferred Chimney Liner & Rebuild Company
Revere homeowners have been calling us since 1984 because we document every inspection with photos and a plain-English verdict, then back every job with the 90-Day Done Right Promise in writing. No arguing. No paperwork chase. If it’s not right, we come back.
Our technicians are background-checked, uniformed, and carry professional-grade materials from DuraFlex, HeatShield, and Famco on every truck. Most jobs finish in a single visit. You’ll get no-hassle upfront pricing - the number on the estimate is the number on the invoice.
Dispatch and scheduling run from our Boston office, but our crews serve Revere locally and know the difference between a triple-decker off Shirley Avenue and a single-family on Ocean Avenue. That local knowledge matters when you’re diagnosing salt-air damage.
Our Chimney Liner & Rebuild Services in Revere
Stainless Steel Liner Installation
Revere’s salt air destroys galvanized components. We install stainless steel liners from DuraFlex and Olympia Chimney that resist corrosion and carry lifetime warranties against material failure. A typical stainless steel liner installation in Revere runs $2,200-$3,800 depending on flue height and diameter, with most jobs completed in four to six hours.
On triple-deckers near Revere Beach Boulevard, we regularly find the original terracotta flue tiles cracked from decades of freeze-thaw cycling. Stainless steel handles thermal shock better and creates a sealed, properly sized passage for exhaust gases. No more creosote leaking into abandoned flues. No more draft problems on the top floor.
Flexible Liner Installation
Some Revere chimneys have offsets or bends that rigid stainless can’t navigate - especially in the older two-family homes off Broadway with chimney stacks that have settled over a century. Flexible liners from DuraFlex conform to these irregular passages while delivering the same corrosion resistance.
A flexible liner installation in Revere typically costs $2,400-$4,200, slightly more than rigid in straight flues because of the specialized fitting required. The trade-off is a proper seal in chimneys that would otherwise need extensive masonry work to straighten.
Liner Replacement
Full liner replacement becomes necessary when the existing liner is compromised beyond spot repair - cracked terracotta, corroded galvanized sections, or a clay liner that has collapsed into the flue. In Revere’s triple-deckers, we see this most often where an oil-to-gas conversion left an unlined flue sharing a stack with an active fireplace.
Liner replacement in Revere runs $1,800-$3,500 for a single flue, with multi-flue stacks on triple-deckers ranging $3,200-$5,800. We pull a camera through every flue before quoting, so you see exactly what we see. Nothing is recommended without photo evidence.
Partial Chimney Rebuild
When salt-driven spalling has destroyed the top courses of brick and the crown is cracked through, a partial rebuild restores structural integrity without the cost of tearing down the entire stack. We rebuilt the crown and flashing on a triple-decker off Revere Beach Boulevard after a nor’easter drove salt spray into the brickwork, leaving the original galvanized cap corroded through and the mortar joints deeply eroded. Our crew replaced the cap with a stainless steel model, repointed the stack, and installed a stainless flexible liner in the active flue, restoring draft and stopping further water intrusion.
Partial rebuilds in Revere typically range $3,500-$6,500. Full rebuilds on severely compromised triple-decker stacks can reach $8,500-$14,000. We always quote both options when both are viable, with plain-English guidance on how long each will last.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Revere
We stock parts and materials from DuraFlex, HeatShield, Famco, and Copperfield on every Revere-bound truck. These are the brands we trust for coastal conditions - no builder-grade substitutes that’ll corrode out in five seasons. HeatShield’s cerfractory flue resurfacing can restore a sound terracotta liner without full replacement, saving Revere homeowners money when the damage is surface-level. DuraFlex’s stainless flexible liners carry the best warranty in the business for salt-air environments. Because we keep inventory moving through our Boston warehouse, most Revere jobs need no special-order delay.
Common Chimney Liner & Rebuild Problems We See in Revere Homes
- Galvanized caps and flashing corroded through from salt air. Revere’s Atlantic exposure destroys galvanized steel in half the time it lasts in Everett or Malden. Once the cap rusts through, water enters the flue and begins eroding the crown from below.
- Spalled brick faces and eroded mortar joints from freeze-thaw cycling. Salt-laden moisture penetrates masonry, expands when it freezes, and pops off brick faces. We’ve seen triple-deckers on Revere Beach Boulevard with mortar joints eroded to finger-width gaps while equivalent homes inland still show tight pointing.
- Unlined or damaged flues in shared triple-decker stacks. When one unit converted from oil to gas and abandoned a flue, the remaining terracotta often cracked from thermal shock. Creosote leaks into adjacent flues. Draft fails on the top floor. The fix is a properly sized liner in every active flue.
- Cracked crowns allowing water into the stack interior. Concrete crowns without proper drip edges or expansion joints crack within a decade in Revere’s climate. Water enters, freezes, and accelerates damage to everything below.
Pricing for Chimney Liner & Rebuild in Revere, MA
| Service | Typical Range in Revere |
|---|---|
| Stainless steel liner (single flue) | $2,200 - $3,800 |
| Flexible liner installation | $2,400 - $4,200 |
| Liner replacement (single flue) | $1,800 - $3,500 |
| Liner replacement (multi-flue triple-decker) | $3,200 - $5,800 |
| Partial rebuild (crown, cap, top courses) | $3,500 - $6,500 |
| Full chimney rebuild | $8,500 - $14,000 |
| Level 2 camera inspection with photo report | $289 - $389 |
What moves the number? Flue height, accessibility, whether we need scaffolding on a tight triple-decker lot, and how far the salt damage has traveled down the stack. We always inspect before quoting - camera, photos, plain-English verdict. The estimate is free. Call (857) 392-4709.
Revere’s coastal exposure means we see more advanced damage than inland communities. A crown repair that might last fifteen years in Malden could need attention again in eight here. We factor that into our recommendations, never upselling work that can safely wait.
We Also Serve Cities Near Revere
Our crews work throughout the immediate area - Revere, Chelsea, Everett, Malden, and Saugus - with the same live-answer phone, same documented inspections, and same 90-Day Done Right Promise. Salt-air severity decreases as you move inland, but the triple-decker housing stock and aging chimney infrastructure create similar challenges across these communities.
Serving Revere, MA - Our Local Coverage Area
We’re based in the Revere area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Liner & Rebuild in Revere
Annually, without exception. Revere’s Atlantic exposure drives salt-laden moisture into chimney masonry through repeated freeze-thaw cycles, causing spalled brick faces and eroded mortar joints on triple-deckers decades ahead of equivalent homes in inland Malden or Winthrop. This makes annual Level 2 inspections genuinely necessary here, not optional. Call (857) 392-4709 to schedule - estimates are free.
The galvanized cap and flashing corrode first, typically within 5-8 years of installation in Revere’s salt air versus 12-15 years inland. Once compromised, water enters the crown and begins a cascade of freeze-thaw damage through the brickwork below. We replace with stainless steel components that resist corrosion and carry longer warranties. A camera inspection will show you exactly where your chimney stands.
Most Revere triple-deckers were built between 1910 and 1950 with terracotta flue tiles sized for coal or oil, not modern gas or wood systems. Decades of thermal cycling, combined with salt-moisture intrusion, crack these tiles. Cleaning removes creosote but cannot restore structural integrity to a fractured flue. On the side streets running off Revere Beach Boulevard, it’s common to find triple-deckers where a top-floor unit converted from oil to gas years ago, leaving an unlined, uncapped flue sharing the same brick stack with an active wood-burning fireplace one floor below - a creosote and draft hazard that surprises homeowners almost every time it’s flagged on an inspection. A new liner is the only proper fix.
If the damage is limited to surface cracking and the brick courses below are sound, a crown repair or pour with proper drip edges and expansion joints will last. If salt-driven spalling has destroyed multiple brick courses or the stack shows lean, partial or full rebuild is necessary for safety. We document the distinction with camera photos and show you both options when both exist. Call (857) 392-4709 for an exact assessment - estimates are free.
We install DuraFlex stainless flexible liners, Olympia Chimney rigid stainless systems, and apply HeatShield cerfractory resurfacing where the existing terracotta is sound but surface-damaged. All three are specified for corrosive environments and carry warranties that hold up in coastal conditions. We do not install galvanized or aluminum liners in Revere - they will fail prematurely, and we don’t do work we can’t stand behind.
Written by Russell Haines, Owner at Hearthstone Chimney Co., serving Revere and local communities since 1984.