Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Revere
Chimney repair in Revere typically runs $650-$3,200 depending on whether you need mortar repointing, crown replacement, or full rebuilding of a salt-damaged stack. Most jobs are completed in a single visit after our Level-2 camera inspection, with no-hassle upfront pricing agreed before we start. Call (857) 392-4709 for a free estimate - estimates are free, and a live person answers every call.
We’ve been dispatching crews to Revere from our Boston office for decades, and we know the difference between a chimney that needs a sweep and one that needs structural work. The triple-deckers along Revere Beach Boulevard, the two-families off Broadway, and the older stock up toward North Revere all share one thing: Atlantic salt spray and nor’easter-driven rain that chews through galvanized caps and mortar joints faster than anywhere inland. Our Chimney Repair team carries stainless steel caps, HeatShield liner materials, and professional-grade waterproofing compounds on every truck because we’ve learned what actually survives here.
Why Hearthstone Chimney Co. Is Revere’s Preferred Chimney Repair Company
We’ve served local communities for over 42 years - since 1984 - and we’re not going anywhere. That matters in Revere, where a quick-fix operator might be gone before your warranty expires. Our 90-Day Done Right Promise is backed in writing with no arguing: if it’s not right, we come back. No paperwork battle, no runaround.
Our Level-2 camera inspections end with photos you can see and a plain-English verdict. In Revere, that often means documenting salt-corroded crowns on triple-decker stacks or finding an abandoned oil flue sharing brick with an active wood fireplace - the kind of hidden condition a basic visual inspection misses entirely. We explain what we’re looking at, what it means, and what can wait versus what can’t.
Calls are answered by a live person 24 hours a day, 7 days a week - not a voicemail, not a callback queue. Our technicians are background-checked, uniformed, and carry the materials to complete most jobs in a single visit. The number on your estimate is the number on your invoice. A square deal: no surprises on the bill.
We know Revere’s housing stock because we’ve worked on it. The 1910-1950 triple-deckers with their shared brick chimney stacks, the oil-to-gas conversions that left flues abandoned but uncapped, the wind off Revere Beach that drives rain sideways into mortar joints - this isn’t theoretical for us. We’ve repaired chimneys on Shirley Avenue, off Revere Beach Boulevard, and throughout the city. Chimney Repair in Revere is work we understand from the brick up.
Our Chimney Repair Services in Revere
Mortar Repointing
Revere’s century-old triple-decker chimneys lose mortar joints to salt-laden freeze-thaw cycles at a pace that would surprise inland homeowners. We grind out deteriorated joints to proper depth and repoint with color-matched, professional-grade mortar formulated for coastal exposure. A typical repointing job on a Revere triple-decker stack runs $1,200-$2,800 depending on access and how many courses need work. Done right, it buys you 20-30 years.
Spalling Brick Repair
When salt spray and trapped moisture cause brick faces to flake and crumble - spalling - the damage accelerates fast in Revere’s climate. We remove and replace spalled bricks with matching units, then address the water intrusion that caused it. Spalling repair on a Revere chimney typically costs $800-$2,400. On Revere Beach Boulevard and the side streets running off it, we see this more severely and more often than in Malden or Everett simply because of oceanfront exposure.
Chimney Waterproofing
Waterproofing is not optional on a Revere chimney; it’s maintenance. We apply vapor-permeable professional-grade sealants that let the brick breathe while blocking wind-driven rain and salt spray. Waterproofing a typical Revere triple-decker stack runs $450-$950 and should be refreshed every 5-7 years given the coastal exposure. We use compounds from Copperfield and Famco - professional-grade, not the hardware-store versions that trap moisture and make spalling worse.
Flashing Repair
Flashing is where your chimney meets the roof, and in Revere’s nor’easters, it’s a primary leak point. We repair or replace step flashing, counter flashing, and cricket assemblies using professional-grade materials. Flashing repair in Revere typically runs $350-$850; full replacement where the chimney passes through a complex roofline can reach $1,200-$2,000. Every flashing job includes inspection of the surrounding deck and sheathing because water often travels before it shows inside.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Revere
We stock professional-grade materials from DuraFlex, HeatShield, Famco, and Copperfield - brands that hold up to coastal conditions, not builder-grade substitutes that corrode or fail prematurely. For Revere’s salt-air environment, we specify stainless steel caps and liners rather than galvanized, and we carry HeatShield cerfractory flue spray for resurfacing damaged clay liners without a full tear-out. Having the right materials on the truck means most Revere jobs finish in one visit, not two.
Common Chimney Repair Problems We See in Revere Homes
- Crown and cap corrosion from salt spray. Galvanized caps on Revere Beach Boulevard triple-deckers often rust through in 5-7 years - half the lifespan you’d see inland. Cracked crowns let water into the stack, accelerating spalling and mortar erosion. We replace with stainless steel and seal with professional-grade crown coat.
- Mortar joint erosion accelerated by freeze-thaw with salt-laden moisture. Revere’s Atlantic exposure means more freeze-thaw cycles with salt in the masonry, eroding joints decades faster than in Malden or Everett. Annual inspection catches this before bricks loosen and the stack leans.
- Hidden cross-contamination in shared triple-decker stacks. An abandoned oil flue, uncapped and unlined, sitting beside an active wood or gas flue in the same brick mass - this creates draft problems, creosote migration, and carbon monoxide risk that a Level 1 inspection from the fireplace opening cannot detect. Our Level-2 camera inspection maps every flue in the stack.
- Wind-driven rain intrusion through deteriorated flashing. Revere’s nor’easters push rain uphill and sideways. Flashing that would suffice inland often leaks here. We inspect during active weather when possible, and we overbuild repairs because we know what this climate delivers.
Pricing for Chimney Repair in Revere, MA
Here’s what chimney repair costs in Revere’s market:
- Mortar repointing: $1,200-$2,800
- Spalled brick repair: $800-$2,400
- Chimney waterproofing: $450-$950
- Flashing repair: $350-$850
- Flashing replacement: $1,200-$2,000
- Crown repair/replacement: $650-$1,800
- Stainless steel cap installation: $280-$650
- Partial chimney rebuild: $2,500-$5,500
- Full chimney rebuild: $6,500-$14,000
What moves the number: access (scaffolding versus ladder), how many flues share the stack, extent of hidden damage found during inspection, and whether we can complete the work in one visit. We give you the full price before booking - the number on the estimate is the number on the invoice. Every repair recommendation comes with camera photos you can see for yourself, and we’ll tell you plainly when work can safely wait. Call (857) 392-4709 for your free estimate.
We Also Serve Cities Near Revere
Our crews work throughout the North Shore metro, including Chelsea, Everett, Malden, and Saugus. Each city has its own housing stock and exposure patterns - Malden’s inland triple-deckers age differently than Revere’s salt-battered stacks - and we adjust our inspections and materials accordingly.
Serving Revere, MA - Our Local Coverage Area
We’re based in the Revere area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Repair in Revere
Every year, without exception - the salt spray and nor’easter exposure here accelerate deterioration beyond what annual inspection would catch inland. We recommend Level-2 inspection with camera documentation so you can see exactly what the salt and freeze-thaw have done to mortar joints, crown condition, and flue integrity. Call (857) 392-4709 to schedule - estimates are free.
The galvanized cap and the crown surface fail first, typically within 5-7 years of installation because of direct salt spray and wind-driven rain. Once the cap rusts through or the crown cracks, water enters the stack and begins eroding mortar joints and spalling brick faces from the inside out. We replace caps with stainless steel models and seal crowns with professional-grade compounds formulated for coastal exposure.
Yes - it’s a common and serious condition in Revere’s triple-deckers, and it requires immediate Level-2 inspection with camera documentation. An abandoned, uncapped oil flue sharing a brick stack with an active wood-burning fireplace creates draft imbalance, allows creosote and combustion gases to migrate between flues, and can become a carbon monoxide pathway. We map every flue in the stack, cap abandoned flues properly, and install appropriate liners in active flues before the burning season starts.
Stainless - exclusively for Revere’s salt-air environment. Galvanized caps and components corrode too quickly here, often failing before the warranty period ends. We specify 304 or 316 stainless steel caps from Famco and Copperfield, and DuraFlex stainless liners for relining work. The upfront cost is higher, but the lifespan in coastal conditions more than pays for the difference.
If mortar joints are eroded but bricks remain sound and the stack is plumb, repointing is the right repair and typically costs $1,200-$2,800 in Revere. If bricks are spalling throughout, the stack leans, or the structure has shifted from foundation settling or freeze-thaw damage, partial or full rebuild becomes necessary - starting around $2,500 and ranging to $14,000 for a complete triple-decker stack. Our Level-2 inspection with photos shows you exactly which condition you’re in, and we’ll tell you plainly if repointing will suffice or if you’re patching toward a bigger bill. Call (857) 392-4709 for a free estimate.
Ready to Get Your Revere Chimney Fixed Right?
Call (857) 392-4709 now. A live person will answer - 24 hours a day, 7 days a week - and we’ll schedule your free estimate at a time that works for you. We’ll inspect with our camera, show you the photos, explain what needs doing and what can wait, and give you one upfront price in writing. Then we’ll complete most jobs in a single visit, and our 90-Day Done Right Promise covers everything - in writing, no arguing. Done right - and we stand behind it.
Written by Russell Haines, Owner at Hearthstone Chimney Co., serving Revere and local communities for over 42 years.